SKU:MLE05130
Bambu Lab A1 Mini Combo 3D Printer
. Learn More.
Couldn't load pickup availability
About the Product
Product Features
- Full-auto Calibration.
- 4-Color Printing with AMS lite.
- Under 48 dB Low Noise in Silent Mode.
- Full-metal Linear Rails and Bearings.
- Vibration and Flow Rate Compensation.
- Multi-Color Printing
- Plug-N-Play
- Active Flow Rate Compensation
- Full Auto Calibration
- Active Motor Noise Cancelling
- High Speed Precision
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.
Active Motor Noise Cancelling
The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Bed Slinger, with CoreXY Speed And Quality (High-Speed Precision)
Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.
Bambu Lab A1 mini Technical Specification
Warranty
1-Year Parts and Service Warranty
- Printers/AMS/AMS lite
3-months Consumable Warranty
- Bed
- Hotend
- Belt
- Extruder Unit (excluding the Extruder Gear Assembly and the Extruder Filament Sensor）
- AMS/AMS lite Feeder Unit (excluding the AMS Feeding Funnel Unit/AMS lite Filament Funnel Unit）
- AMS lite Rotary Spool Holder (excluding the AMS lite Spool Claw)
- Stock Micro SD Card (32 GB)
Consumable Parts with No Warranty
-
- Complete Bambu Hotend and all its individual parts (Cooling Fan for Hotend, Ceramic Heater, Thermistor and Silicone Sock for Hotend)
- Hardened Steel Extruder Gear Assembly
- Build plates, Glue Stick/Liquid Glue for Build Plate
- PTFE Tube and PTFE Tube Connector
- AMS Active Support Shaft Assembly, AMS Driven Support Shaft Assembly, and AMS Feeder Funnel Unit, AMS lite Spool Claw
- Filament Cutter Lever, Bambu Scraper, filament wipers, Bambu Activated Carbon Air Filter, Desiccant for AMS, filaments, etc.
- Complete Bambu Hotend and all its individual parts (Cooling Fan for Hotend, Ceramic Heater, Thermistor and Silicone Sock for Hotend)
These items are not covered under a specific warranty period, but Bambu Lab may replace them for manufacturing defects if the printer is still under warranty. Replacement decisions are at Bambu Lab's discretion and are final.
Only purchase receipts issued by Bambu Lab or distributors authorized by Bambu Lab are valid for warranty.
